Description:
Endless flattened zero halogen heat shrink polyolefin tubing with ideal properties for identification by thermal transfer printing. Developed for general purpose and for applications in underground, railway, marine and offshore.
Features:
- Excellent print quality
- Zero halogen
- Ready to use for thermal transfer printers
- Vehicle category Ia according BS6853 (1999)
- 2:1 shrink ratio in inch size
- Shrink temperature > 90°C
- Operating temperature -55°C to +105°C
Ribbons recommended: best print results are achieved with our recommended ribbons
Download:
Standard packaging:
Reels
Size [inch] | Size [mm] | Flat width [nominal value, mm] | Maximum Inside Diameter Recovered [ mm] | Wall Thickness Recovered [nominal value, mm] |
---|---|---|---|---|
3/32 | 2,4 | 4,2 | 1,2 | 0,51 |
1/8 | 3,2 | 5,6 | 1,6 | 0,63 |
3/16 | 4,8 | 7,6 | 2,4 | 0,63 |
1/4 | 6,4 | 10,7 | 3,2 | 0,72 |
3/8 | 9,5 | 15,1 | 4,8 | 0,70 |
1/2 | 12,7 | 20,9 | 6,4 | 0,70 |
3/4 | 19,1 | 30,9 | 9,5 | 0,77 |
1 | 25,4 | 40,5 | 12,7 | 0,92 |
1 1/2 | 38,1 | 60,5 | 19,1 | 0,97 |
2 | 50,8 | 79,3 | 25,4 | 0,97 |
Property | Test method | Typical value |
---|---|---|
Tensile strength | ASTM D 638 | 10 N/mm2 |
Elongation at break | ASTM D 638 | 200% |
Longitudinal change | ASTM D 2671 | -10% to +5% |
Water absorption | ASTM D 570 | ≤ 0,15% |
Specific gravity | ASTM D 792 | 1,40 |
Property | Test method | Typical value |
---|---|---|
Heat shock 4 hours at 175°C | ASTM D 2671 | no dripping, cracking or flowing |
Heat aging 168 hours at 150°C | ASTM D 638 | elongation ≥ 100% |
Low temp. flexibility at -55°C | ASTM D 2671 C | no break, no crack, no detachment of coating or detamination |
Flammability | ASTM D 635-HB | pass |
Optical density of smoke (Dm) | ASTM E 662 | flaming mode 41 non-flaming mode 111 |
Property | Test method | Typical value |
---|---|---|
Dielectric strength | ASTM D 2671 | 20kV/mm |
Volume resistivity | ASTM D 257 | 1014 ohm/cm |
Property | Test method | Typical value |
---|---|---|
Chemical resistance | AMS-DTL-23053/5 | good |
Copper corrosion | ASTM D 2671 B | no corrosion |
Oxygen index | EN ISO 4589-2 (1999) | 36% |
Property | Test method | Typical value |
---|---|---|
Adherence test (eraser method) | SAE AS81531 | legible |
Fluid resistance | MIL-STD-202G method 215K | |
Isopropyl Alcohol \ Mineral spirits blend | 10 rubs (X3) | legible |
Terpene defluxer | 10 rubs (X3) | legible |
H2O \ PGME \ Monoethanolamine | 10 rubs (X3) | legible |
Property | Tape Y201P | Tape Y501P |
---|---|---|
Smear resistance (10 rubs) | ||
Diesel | 3 | 2 |
Hydraulic oil | 1 | 1 |
Unleaded gasoline | 5 | 4 |
Ethyl alcohol 92% | 1 | 1 |
Ethyl alcohol 95% | 1 | 1 |
Legend: | ||
1 - no effect, 2 - slight fading, 3 - moderate fading but still legible, 4 - severe fading and print illegible, 5 - complete print removal |
Property | Test method | Tape Y201P | Tape Y501P |
---|---|---|---|
Scratch test (rough sponge method) | in-house | ||
10 rubs | good | very good | |
Solvent test | in-house | ||
Isopropyl alcohol 99,9% | 10 rubs | good | excellent |
Isopropyl alcohol 99,9% | 20 rubs | good | excellent |
Norms:
- SAE AS81531 4.6.2 *
- MIL-STD-202G method 215K *
- ASTM D 635-HB flammability resistance
- Boeing BS 7239 toxic gas generation M7
Railway normative:
- BS6853 (1999) ehicle category Ia
- EN 45545-2 class HL3
- LUL 1-085: A3 compliant
* when used in conjuction with Y201P or Y501P ribbon
Description:
Endless Flattened 3:1 UL224/CSA heat-shrink polyolefin tubing with ideal properties for identification by thermal transfer printing. Designed to cover a wide range of applications for panel builders, shipyard and cable harness manufacturing.
Features:
- Very good print results
- Flame retardant according to UL224/CSA
- Ready to use for thermal transfer printers
- 3:1 shrink ratio in inch size
- Shrink temperature > 90°C
- Operating temperature -55°C to +135°C
Ribbons recommended: best print results are achieved with our recommended ribbons
Download:
Standard packaging:
Reels
Size [inch] | Size [mm] | Flat width (nominal value, mm) | Maximum Inside Diameter Recovered [mm] | Wall Thickness Recovered [ mm] |
---|---|---|---|---|
3/32 | 2,4 | 4,2 | 0,8 | 0,53 |
1/8 | 3,2 | 5,6 | 1,0 | 0,58 |
3/16 | 4,8 | 7,6 | 1,6 | 0,58 |
1/4 | 6,4 | 10,7 | 2,0 | 0,63 |
3/8 | 9,5 | 15,1 | 3,0 | 0,63 |
1/2 | 12,7 | 20,9 | 4,0 | 0,68 |
3/4 | 19,1 | 30,9 | 6,0 | 0,90 |
1 | 25,4 | 40,5 | 8,0 | 1,00 |
1 1/2 | 38,1 | 60,5 | 12,7 | 1,10 |
Physical properties:
Property | Test method | Typical value |
---|---|---|
Tensile strength | ASTM D638 | >11 N/mm2 |
Elongation at break | ASTM D638 | >300% |
Longitudinal change | ASTM D2671 | -10% to +5% |
Water absorption | ASTM D570 | max. 0,5% |
Specific gravity | ASTM D792 | 1,40 |
Thermal properties:
Property | Test method | Typical value |
---|---|---|
Heat shock 4 hours at 250°C | ASTM D2671 | no dripping, cracking or flowing |
Heat aging 168 hours at 175°C | ASTM D2671 | elongation 200% |
Low temp. flexibility at -55°C | ASTM D2671 C | no cracking |
Flammability | UL224 | pass |
Electrical properties:
Property | Test method | Typical value |
---|---|---|
Dielectric strength | ASTM D2671 | 20kV/mm |
Volume resistivity | ASTM D257 | 1014 ohm/cm |
Chemical properties:
Property | Test method | Typical value |
---|---|---|
Chemical resistance | EN 60684-2-36 | good |
Copper corrosion | ASTM D2671 B | no corrosion |
Property | Test method | Typical value |
---|---|---|
Adherence test (eraser method) | SAE AS81531 | legible |
Fluid resistance | MIL-STD-202G method 215K | |
Isopropyl Alcohol \ Mineral spirits blend | 10 rubs (X3) | legible |
Terpene defluxer | 10 rubs (X3) | legible |
H2O \ PGME \ Monoethanolamine | 10 rubs (X3) | legible |
Property | Tape Y201P | Tape Y501P |
---|---|---|
Smear resistance (10 rubs) | ||
Diesel | 3 | 2 |
Hydraulic oil | 1 | 1 |
Unleaded gasoline | 5 | 4 |
Ethyl alcohol 92% | 1 | 1 |
Ethyl alcohol 95% | 1 | 1 |
Legend: | ||
1 - no effect, 2 - slight fading, 3 - moderate fading but still legible, 4 - severe fading and print illegible, 5 - complete print removal |
Property | Test method | Tape Y201P | Tape Y501P |
---|---|---|---|
Scratch test (rough sponge method) | in-house | ||
10 rubs | good | very good | |
Solvent test | in-house | ||
Isopropyl alcohol 99,9% | 10 rubs | good | excellent |
Isopropyl alcohol 99,9% | 20 rubs | good | excellent |
Norms:
- UL 224, 125°C Cert. UL E228117, CSA C 22.22 No. 198.1-98, OFT
- SAE AS81531 4.6.2 *
- MIL-STD-202G method 215K *
Railway normative:
- EN 45545-2 class HL1\HL2
* when used in conjuction with Y501P and Y501P-DR ribbons
Description:
Resin ribbons offer the highest degree of scratch resistance. They are also resistant to a wide range of solvents and can be used in applications in which very high temperatures are encountered. Y501P is capable of handling extreme environmental. Designed with anti-static backcoat properties to protect the printhead. Y501P are composed of 5 layering ingredients: backcoat, PET film, release layer, Ink and adhesive layer.
Reel width [mm] | Reel length [m] | Other information |
---|---|---|
30 | 450 | Other sizes and colours on request |
Description:
Y501P-DR is a high-performance thermo-transfer ink ribbon. Commonly used to print on heat shrink tubing. Ideal for printing of logos, bar codes, text and various characters. The ribbon provides an excellent chemical and scratch resistance print result and guarantees high continuous printability also for serial production. Recommended to use with tested printer CAB A4+M.
Features:
- Excellent print results
- Excellent scratch and solvent resistance
- High density printing
- Halogen free
Applications:
- Telecomunication and electronic components process control
- Production control of automobile parts
- Used on nameplates on electronic parts
Download:
Related products: TagsReel width [mm] | Reel length [m] | Packaging |
---|---|---|
40 | 300 | 48 reels \ carton |
60 | 300 | |
80 | 300 | |
100 | 300 | |
120 | 300 |
Property | Test details | Typical value |
---|---|---|
Chemical resistance (wet cotton) | Water | Print erase after min. 50 times |
Toluene | Print erase after min. 50 times | |
Acetone | Print erase after min. 50 times | |
Diesel | Print erase after min. 50 times | |
Scratch resistance (plastic eraser) | - | Print erase after min. 40 times |
- | Print erase after min. 50 times | |
Heat resistance | 300oC for 5 minutes | Appearance change of print good |
150oC for 10 days | Appearance change of print good |
Property | Typical value |
---|---|
Thickness of ribbon | 8 µm |
Thickness of polyester film | 5 µm |
Ink weight | 2,3 g/m2 |
Minimum order quantity: 48 reels. Delivery time from 8 to 10 weeks after receiving an order.