A- A A+

Heat shrinkable products, cable & wire identification

Y501P-DR

  • Basic inf.

  • Sizes

  • Colours (1)

  • Properties

  • Additional inf.

  • Tape structure

Ribbon

Description:

Y501P-DR is a  high-performance  thermo-transfer ink resin ribbon. Commonly used to print on heat shrink tubing. Ideal for printing of logos, bar codes, text and various characters. The ribbon provides an excellent  chemical and scratch resistance print result and guarantees high continuous printability also for serial production. Recommended to use with tested printer CAB A4+M.

Features:

  1. Excellent print results
  2. Excellent scratch and solvent resistance
  3. High density printing
  4. Halogen free

Applications:

  1. Telecomunication and electronic components process control
  2. Production control of automobile parts
  3. Used on nameplates on electronic parts

Download:

pdf Y501-DR

Related products:

article icon FLZH201B, article icon FLNF301P, article icon NZH201B, article icon NF301P

Tags help icon
 identification 
Reel width [mm]Reel length [m]Packaging
40 300 48 reels \ carton
60 300
80 300
100 300
120 300
Stock colours:

  • BLACK

PropertyTest detailsTypical value
Chemical resistance (wet cotton)  Water Print erase after min. 50 times
 Toluene Print erase after min. 50 times
 Acetone Print erase after min. 50 times
 Diesel Print erase after min. 50 times
Scratch resistance (plastic eraser)  - Print erase after min. 40 times
 - Print erase after min. 50 times
Heat resistance  300oC for 5 minutes Appearance change of print good
 150oC for 10 days Appearance change of print good

 

PropertyTypical value
Thickness of ribbon 8 µm
Thickness of polyester film 5 µm
Ink weight 2,3 g/m2

Minimum order quantity: 48 reels. Delivery time from 8 to 10 weeks after receiving an order.

warstwyY501P DRen

Y501P

  • Basic inf.

  • Sizes

  • Colours (2)

  • Tape structure

  • Print resistance

Ribbon

Description:

Resin ribbons offer the highest degree of scratch resistance. They are also resistant to a wide range of solvents and can be used in applications in which very high temperatures are encountered. Y501P is capable of handling extreme environmental. Designed with anti-static backcoat properties to protect the printhead. Y501P are composed of 5 layering ingredients: backcoat, PET film, release layer, Ink and adhesive layer.

Features:

  1. Excellent print results
  2. Heat resistant up to +105°C
  3. Excellent solvent resistance
  4. High density printing
  5. Backcoating for printhead protection

Download:

pdf Y501P

Related products:

article icon FLZH201B, article icon FLNF301P, article icon NZH201B, article icon NF301P

Tags help icon
 identification 
Reel width [mm]Reel length [m]Other information
30 450 Other sizes and colours on request
Stock colours:

  • WHITE

  • BLACK

warstwyY501Pen
wykres Y501P en

FLNF301P

  • Basic inf.

  • Sizes

  • Colours (5)

  • Print performance

  • Approval

  • No title

FLNF301P

Description:

Flatenned flexible, self-extinguishing thin-wall heat-shrink polyolefin tubing, UL/CSA recognized. High shrink ratio designed and sized to be flattened for identification purposes.

Shrink ratio: 3:1
Materials: Crosslinked EVA
Installation temperature:

  1. Shrinking temperature:  > 90°C
  2. Operating temperature: -55°C to +135°C

Features and benefits

  1. UL Recognized Component (US & Canada)
  2. 3:1 ratio - fits parts 3x larger than the cable
  3. Very flexible, smooth surface excellent printability
  4. Permanent identification result
  5. Fast installation with heat guns
  6. Wide temperature window
  7. Self-extinguishing
  8. Remains flexible after recovery
  9. 600V insulation rating

Download:

pdf FLNF301P |  Supplementary safety information

Standard packaging:
article icon Reel

Related products:
article icon NF301P; article icon Y501P, article icon Y501P-DR, article icon HAG, article icon CHAG

Tags help icon

 -55°C to 135°C 
 EN 45545-2 
 flatenned 
 flexible 
 heat shrinkable 
 identification 
 NFPA130 
 shrink ratio 3:1 
 thin wall 
 UL224 CSA C22.2 

 tube

DIMENSIONS
SizeMin. Ø supplied "D"
[mm]		 Max. Ø recovered "d"
[mm]		Recovered wall thickness [NOM] "W"
[mm]
[inch][mm]
3/32 2,4 2,4 0,8 0,53
1/8 3,2 3,2 1,0 0,58
3/16 4,8 4,8 1,6 0,58
1/4 6,4 6,4 2,0 0,63
3/8 9,5 9,5 3,0 0,63
1/2 12,7 12,7 4,0 0,68
3/4 19,1 19,1 6,0 0,90
1 25,4 25,4 8,0 1,00
1 1/2 38,1 38,1 12,7 1,10
Standard colours *:

  • WHITE

  • YELLOW

Non standard colours *:

  • BLACK

  • RED

  • BLUE

* Listed above colours are illustrative and can differ from the physical samples. The differences arise because of differences in hardware monitors, printers and other devices

Print performance

DescriptionTest methodRequirementsTest results
Y501PY501P-DR
Marking of electrical insulating materials SAE AS5942 4.1 Marking shall be uniform, clear and easily identified pass pass
 Resistance to solvents  MIL-STD-202 met. 215K    Any specified marking must be readily with normal room lighting    - - 
 Solution A  pass pass 
 Solution C  pass pass 
 Solution D pass   pass
 Scratch test  in-house  Evaluate using contrast reference scape in a descriptive manner very good excellent 
 Solvent test IPA 99,9%  in-house  good very good
 Smear resistance  in-house Evaluate using smear resistance evaluation form in a numerical way  -  -
Diesel  in-house 3 2
Unlead gasoline 1 1
Acetone 1 1
Tap water 1 1
Ethyl alcohol 92% 2 1
Ethyl alcohol 95% 2 1
Hydraulic oil 1 1
Synthetic sweat 1 1

Smear resistance LEGEND: 1 – no effect; 2 – slight fading; 3 – moderate fading but still legible; 4 – severe fading and print illegible; 5 – complete print removal; Solvent test LEGEND: fail, very poor, poor, fair, good, very good and excellent.

FLNF301P is a flattened version of our round tubing NF301P. Detailed technical information, including physical, thermal, chemical, and mechanical properties, can be found in the NF301P Technical Data Sheet. For further details, please visit our website at www.ecscableprotection.com and refer to the 0-HAL thin-wall products section.

[tab title="Certification"]


Certification:
UL224 / CSA C22.2 No. 198.1 File E228117, 125°C, 600V 1)

1) Recovered ID up to 12.7 mm. 

FLZH201B

  • Basic inf.

  • Sizes

  • Colours (7)

  • Print performance

  • Approval

FLZH201B

Description:

Flatenned thin wall heat-shrink tubing in cross-linked polyolefin, low smoke, halogen free. with high mechanical strenght and chemical resistance. Designed fo identification purpose.

Shrink ratio: 2:1
Materials: Crosslinked EVA
Installation temperature:

  1. Shrinking temperature:  > 90°C
  2. Operating temperature: -55°C to +105°C

Application:

  1. Public transport
  2. Panel building
  3. Industrial installations
  4. Aerospace, defense

Features and benefits

  1. Halogen free
  2. Very good fluid resistance
  3. Weather & UV resistant
  4. Very flexible, smooth surface, excellent printability
  5. Highest safety class in rail transport: low smoke and toxicity emissions
  6. Permanent identification result

Download:

pdf FLZH201B

Standard packaging:
article icon Reel

Related products:
article icon NZH201B; article icon Y501P, article icon Y501P-DR, article icon HAG, article icon CHAG

Tags help icon

 -55°C to +105°C 
 BSS7239 
 EN 45545-2 
 flatenned 
 flexible 
 halogen free 
 heat shrink tubing 
 identification 
 MIL-STD-202 
 SAE AS5942 
 shrink ration 3:1 
 thin wall 

 tube

DIMENSIONS
SizeMin. Ø supplied "D"
[mm]		 Max. Ø recovered "d"
[mm]		Recovered wall thickness [NOM] "w"
[mm]
[inch][mm]
3/32 2,4 2,4 1,8 0,51
1/8 3,2 3,2 1,6 0,63
3/16 4,8 4,8 2,4 0,63
1/4 6,4 6,4 3,2 0,72
3/8 9,5 9,5 4,8 0,70
1/2 12,7 12,7 6,4 0,70
3/4 19,1 19,1 9,5 0,77
1 25,4 25,4 12,7 0,92
1 1/2 38,1 38,1 19,1 0,97
2 50,8 50,8  25,4   0,97 
Standard colours *:

  • WHITE

  • BLACK

  • YELLOW

Non standard colours *:

  • BABY RED

  • BABY BLUE

  • BABY GREEN

  • PALE YELLOW

* Listed above colours are illustrative and can differ from the physical samples. The differences arise because of differences in hardware monitors, printers and other devices

Print performance

DescriptionTest methodRequirementsTest results
Y501PY501P-DR
Marking of electrical insulating materials SAE AS5942 4.1 Marking shall be uniform, clear and easily identified pass pass
 Resistance to solvents  MIL-STD-202 met. 215K    Any specified marking must be readily with normal room lighting    - - 
 Solution A  pass pass 
 Solution C  pass pass 
 Solution D pass   pass
 Scratch test  in-house  Evaluate using contrast reference scape in a descriptive manner good very good
 Solvent test IPA 99,9%  in-house  excellent excellent 
 Smear resistance  in-house Evaluate using smear resistance evaluation form in a numerical way  -  -
Diesel  in-house 3 1
Unlead gasoline 3 2
Acetone 3 1
Ethyl alcohol 92% 1 1
Ethyl alcohol 95% 1 1
Hydraulic fluid 1 1
Synthetic sweat 1 1
Tap water 1 1

Smear resistance LEGEND: 1 – no effect; 2 – slight fading; 3 – moderate fading but still legible; 4 – severe fading and print illegible; 5 – complete print removal; Solvent test LEGEND: fail, very poor, poor, fair, good, very good and excellent.

FLZH201B is a flattened version of our round tubing NZH201B. Detailed technical information, including physical, thermal, chemical, and mechanical properties, can be found in the NZH201B Technical Data Sheet. For further details, please visit our website at www.ecscableprotection.com and refer to the 0-HAL thin-wall products section.

Approval:

  1. EN 45545-2 requirements R22\R23\R24, class HL1, HL2 and HL3
  2. LUL S1085 att. B.5
  3. NF F-16-101
  4. Boeing BSS7239
  5. MIL-STD-202 met. 215
  6. SAE AS5942
  7. Complies with REACH and RoHS

Cable & wire identification

  • FLZH201B

  • FLNF301P

  • FLZH301B (new)

  • Y501P

  • Y501P-DR

  • Basic inf.

  • Sizes

  • Colours (7)

  • Print performance

  • Approval

FLZH201B

Description:

Flatenned thin wall heat-shrink tubing in cross-linked polyolefin, low smoke, halogen free. with high mechanical strenght and chemical resistance. Designed fo identification purpose.

Shrink ratio: 2:1
Materials: Crosslinked EVA
Installation temperature:

  1. Shrinking temperature:  > 90°C
  2. Operating temperature: -55°C to +105°C

Application:

  1. Public transport
  2. Panel building
  3. Industrial installations
  4. Aerospace, defense

Features and benefits

  1. Halogen free
  2. Very good fluid resistance
  3. Weather & UV resistant
  4. Very flexible, smooth surface, excellent printability
  5. Highest safety class in rail transport: low smoke and toxicity emissions
  6. Permanent identification result

Download:

pdf FLZH201B

Standard packaging:
article icon Reel

Related products:
article icon NZH201B; article icon Y501P, article icon Y501P-DR, article icon HAG, article icon CHAG

Tags help icon

 -55°C to +105°C 
 BSS7239 
 EN 45545-2 
 flatenned 
 flexible 
 halogen free 
 heat shrink tubing 
 identification 
 MIL-STD-202 
 SAE AS5942 
 shrink ration 3:1 
 thin wall 

 tube

DIMENSIONS
SizeMin. Ø supplied "D"
[mm]		 Max. Ø recovered "d"
[mm]		Recovered wall thickness [NOM] "w"
[mm]
[inch][mm]
3/32 2,4 2,4 1,8 0,51
1/8 3,2 3,2 1,6 0,63
3/16 4,8 4,8 2,4 0,63
1/4 6,4 6,4 3,2 0,72
3/8 9,5 9,5 4,8 0,70
1/2 12,7 12,7 6,4 0,70
3/4 19,1 19,1 9,5 0,77
1 25,4 25,4 12,7 0,92
1 1/2 38,1 38,1 19,1 0,97
2 50,8 50,8  25,4   0,97 
Standard colours *:

  • WHITE

  • BLACK

  • YELLOW

Non standard colours *:

  • BABY RED

  • BABY BLUE

  • BABY GREEN

  • PALE YELLOW

* Listed above colours are illustrative and can differ from the physical samples. The differences arise because of differences in hardware monitors, printers and other devices

Print performance

DescriptionTest methodRequirementsTest results
Y501PY501P-DR
Marking of electrical insulating materials SAE AS5942 4.1 Marking shall be uniform, clear and easily identified pass pass
 Resistance to solvents  MIL-STD-202 met. 215K    Any specified marking must be readily with normal room lighting    - - 
 Solution A  pass pass 
 Solution C  pass pass 
 Solution D pass   pass
 Scratch test  in-house  Evaluate using contrast reference scape in a descriptive manner good very good
 Solvent test IPA 99,9%  in-house  excellent excellent 
 Smear resistance  in-house Evaluate using smear resistance evaluation form in a numerical way  -  -
Diesel  in-house 3 1
Unlead gasoline 3 2
Acetone 3 1
Ethyl alcohol 92% 1 1
Ethyl alcohol 95% 1 1
Hydraulic fluid 1 1
Synthetic sweat 1 1
Tap water 1 1

Smear resistance LEGEND: 1 – no effect; 2 – slight fading; 3 – moderate fading but still legible; 4 – severe fading and print illegible; 5 – complete print removal; Solvent test LEGEND: fail, very poor, poor, fair, good, very good and excellent.

FLZH201B is a flattened version of our round tubing NZH201B. Detailed technical information, including physical, thermal, chemical, and mechanical properties, can be found in the NZH201B Technical Data Sheet. For further details, please visit our website at www.ecscableprotection.com and refer to the 0-HAL thin-wall products section.

Approval:

  1. EN 45545-2 requirements R22\R23\R24, class HL1, HL2 and HL3
  2. LUL S1085 att. B.5
  3. NF F-16-101
  4. Boeing BSS7239
  5. MIL-STD-202 met. 215
  6. SAE AS5942
  7. Complies with REACH and RoHS

  • Basic inf.

  • Sizes

  • Colours (5)

  • Print performance

  • Approval

  • No title

FLNF301P

Description:

Flatenned flexible, self-extinguishing thin-wall heat-shrink polyolefin tubing, UL/CSA recognized. High shrink ratio designed and sized to be flattened for identification purposes.

Shrink ratio: 3:1
Materials: Crosslinked EVA
Installation temperature:

  1. Shrinking temperature:  > 90°C
  2. Operating temperature: -55°C to +135°C

Features and benefits

  1. UL Recognized Component (US & Canada)
  2. 3:1 ratio - fits parts 3x larger than the cable
  3. Very flexible, smooth surface excellent printability
  4. Permanent identification result
  5. Fast installation with heat guns
  6. Wide temperature window
  7. Self-extinguishing
  8. Remains flexible after recovery
  9. 600V insulation rating

Download:

pdf FLNF301P |  Supplementary safety information

Standard packaging:
article icon Reel

Related products:
article icon NF301P; article icon Y501P, article icon Y501P-DR, article icon HAG, article icon CHAG

Tags help icon

 -55°C to 135°C 
 EN 45545-2 
 flatenned 
 flexible 
 heat shrinkable 
 identification 
 NFPA130 
 shrink ratio 3:1 
 thin wall 
 UL224 CSA C22.2 

 tube

DIMENSIONS
SizeMin. Ø supplied "D"
[mm]		 Max. Ø recovered "d"
[mm]		Recovered wall thickness [NOM] "W"
[mm]
[inch][mm]
3/32 2,4 2,4 0,8 0,53
1/8 3,2 3,2 1,0 0,58
3/16 4,8 4,8 1,6 0,58
1/4 6,4 6,4 2,0 0,63
3/8 9,5 9,5 3,0 0,63
1/2 12,7 12,7 4,0 0,68
3/4 19,1 19,1 6,0 0,90
1 25,4 25,4 8,0 1,00
1 1/2 38,1 38,1 12,7 1,10
Standard colours *:

  • WHITE

  • YELLOW

Non standard colours *:

  • BLACK

  • RED

  • BLUE

* Listed above colours are illustrative and can differ from the physical samples. The differences arise because of differences in hardware monitors, printers and other devices

Print performance

DescriptionTest methodRequirementsTest results
Y501PY501P-DR
Marking of electrical insulating materials SAE AS5942 4.1 Marking shall be uniform, clear and easily identified pass pass
 Resistance to solvents  MIL-STD-202 met. 215K    Any specified marking must be readily with normal room lighting    - - 
 Solution A  pass pass 
 Solution C  pass pass 
 Solution D pass   pass
 Scratch test  in-house  Evaluate using contrast reference scape in a descriptive manner very good excellent 
 Solvent test IPA 99,9%  in-house  good very good
 Smear resistance  in-house Evaluate using smear resistance evaluation form in a numerical way  -  -
Diesel  in-house 3 2
Unlead gasoline 1 1
Acetone 1 1
Tap water 1 1
Ethyl alcohol 92% 2 1
Ethyl alcohol 95% 2 1
Hydraulic oil 1 1
Synthetic sweat 1 1

Smear resistance LEGEND: 1 – no effect; 2 – slight fading; 3 – moderate fading but still legible; 4 – severe fading and print illegible; 5 – complete print removal; Solvent test LEGEND: fail, very poor, poor, fair, good, very good and excellent.

FLNF301P is a flattened version of our round tubing NF301P. Detailed technical information, including physical, thermal, chemical, and mechanical properties, can be found in the NF301P Technical Data Sheet. For further details, please visit our website at www.ecscableprotection.com and refer to the 0-HAL thin-wall products section.

[tab title="Certification"]


Certification:
UL224 / CSA C22.2 No. 198.1 File E228117, 125°C, 600V 1)

1) Recovered ID up to 12.7 mm. 

  • Basic inf.

  • Sizes

  • Colours (7)

  • Print performance

  • Approval

FLZH301B

Description:

Flatenned thin wall heat-shrink tubing in cross-linked polyolefin with high mechanical strength and chemical resistance.

Shrink ratio: 3:1
Materials: Crosslinked EVA
Installation temperature:

  1. Shrinking temperature:  > 90°C
  2. Operating temperature: -55°C to +105°C

Application:

  1. Public transport
  2. Panel building
  3. Industrial installations
  4. Aerospace, defense

Features and benefits

  1. Halogen free
  2. Very good fluid resistance
  3. Weather & UV resistant
  4. Very flexible, smooth surface, excellent printability
  5. Highest safety class in rail transport: low smoke and toxicity emissions
  6. Permanent identification result

Download:

pdf FLZH301B

Standard packaging:
article icon Reel

Related products:
article icon NZH301B; article icon Y501P, article icon Y501P-DR, article icon HAG, article icon CHAG

Tags help icon

 -55°C to +105°C 
 BSS7239 
 EN 45545-2 
 flatenned 
 flexible 
 halogen free 
 heat shrink tubing 
 identification 
 MIL-STD-202 
 SAE AS5942 
 shrink ration 3:1 
 thin wall 

 tube

DIMENSIONS
SizeMin. Ø supplied "D"
[mm]		 Max. Ø recovered "d"
[mm]		Recovered wall thickness [NOM] "W"
[mm]
[inch][mm]
3/32 2,4 2,4 0,8 0,53
1/8 3,2 3,2 1,2 0,56
3/16 4,8 4,8 1,6 0,56
1/4 6,4 6,4 2,4 0,64
3/8 9,5 9,5 3,2 0,64
1/2 12,7 12,7 4,7 0,68
3/4 19,1 19,1 6,4 0,90
1 25,4 25,4 8,5 0,98
1 1/2 38,1 38,1 13,5 1,08
Standard colours *:

  • WHITE

  • BLACK

  • YELLOW

Non standard colours *:

  • BABY RED

  • BABY BLUE

  • BABY GREEN

  • PALE YELLOW

* Listed above colours are illustrative and can differ from the physical samples. The differences arise because of differences in hardware monitors, printers and other devices

Print performance

DescriptionTest methodRequirementsTest results
Y501PY501P-DR
Marking of electrical insulating materials SAE AS5942 4.1 Marking shall be uniform, clear and easily identified pass pass
 Resistance to solvents  MIL-STD-202 met. 215K    Any specified marking must be readily with normal room lighting    - - 
 Solution A  pass pass 
 Solution C  pass pass 
 Solution D pass   pass
 Scratch test  in-house  Evaluate using contrast reference scape in a descriptive manner very good excellent 
 Solvent test IPA 99,9%  in-house  very good excellent 
 Smear resistance  in-house Evaluate using smear resistance evaluation form in a numerical way  -  -
Diesel  in-house 1 1
Unlead gasoline 3 2
Acetone 2,5 1
Tap water 1 1

Smear resistance LEGEND: 1 – no effect; 2 – slight fading; 3 – moderate fading but still legible; 4 – severe fading and print illegible; 5 – complete print removal; Solvent test LEGEND: fail, very poor, poor, fair, good, very good and excellent.

FLZH301B is a flattened version of our round tubing NZH301B. Detailed technical information, including physical, thermal, chemical, and mechanical properties, can be found in the NZH301B Technical Data Sheet. For further details, please visit our website at www.ecscableprotection.com and refer to the 0-HAL thin-wall products section.

Approval:

  1. EN 45545-2 requirements R22\R23\R24, class HL1, HL2 and HL3
  2. Boeing BSS7239
  3. MIL-STD-202 met. 215
  4. SAE AS5942
  5. Complies with REACH and RoHS

  • Basic inf.

  • Sizes

  • Colours (2)

  • Tape structure

  • Print resistance

Ribbon

Description:

Resin ribbons offer the highest degree of scratch resistance. They are also resistant to a wide range of solvents and can be used in applications in which very high temperatures are encountered. Y501P is capable of handling extreme environmental. Designed with anti-static backcoat properties to protect the printhead. Y501P are composed of 5 layering ingredients: backcoat, PET film, release layer, Ink and adhesive layer.

Features:

  1. Excellent print results
  2. Heat resistant up to +105°C
  3. Excellent solvent resistance
  4. High density printing
  5. Backcoating for printhead protection

Download:

pdf Y501P

Related products:

article icon FLZH201B, article icon FLNF301P, article icon NZH201B, article icon NF301P

Tags help icon
 identification 
Reel width [mm]Reel length [m]Other information
30 450 Other sizes and colours on request
Stock colours:

  • WHITE

  • BLACK

warstwyY501Pen
wykres Y501P en

  • Basic inf.

  • Sizes

  • Colours (1)

  • Properties

  • Additional inf.

  • Tape structure

Ribbon

Description:

Y501P-DR is a  high-performance  thermo-transfer ink resin ribbon. Commonly used to print on heat shrink tubing. Ideal for printing of logos, bar codes, text and various characters. The ribbon provides an excellent  chemical and scratch resistance print result and guarantees high continuous printability also for serial production. Recommended to use with tested printer CAB A4+M.

Features:

  1. Excellent print results
  2. Excellent scratch and solvent resistance
  3. High density printing
  4. Halogen free

Applications:

  1. Telecomunication and electronic components process control
  2. Production control of automobile parts
  3. Used on nameplates on electronic parts

Download:

pdf Y501-DR

Related products:

article icon FLZH201B, article icon FLNF301P, article icon NZH201B, article icon NF301P

Tags help icon
 identification 
Reel width [mm]Reel length [m]Packaging
40 300 48 reels \ carton
60 300
80 300
100 300
120 300
Stock colours:

  • BLACK

PropertyTest detailsTypical value
Chemical resistance (wet cotton)  Water Print erase after min. 50 times
 Toluene Print erase after min. 50 times
 Acetone Print erase after min. 50 times
 Diesel Print erase after min. 50 times
Scratch resistance (plastic eraser)  - Print erase after min. 40 times
 - Print erase after min. 50 times
Heat resistance  300oC for 5 minutes Appearance change of print good
 150oC for 10 days Appearance change of print good

 

PropertyTypical value
Thickness of ribbon 8 µm
Thickness of polyester film 5 µm
Ink weight 2,3 g/m2

Minimum order quantity: 48 reels. Delivery time from 8 to 10 weeks after receiving an order.

warstwyY501P DRen

More Articles ...

  1. FLZH301B (new)