The hot air gun is an electrical tool, second insulation class, which is used to produce hot air blow. Hot air can be applied to many applications amongst others to shrink heat shrinkable tubing, to remove old oil paint and varnish, from for example , furniture, wainscot, floors, doors, windows etc.
|1||Casing||Casting made of high temperaturę resistant plastic. Designed to ensure proper operation of the heat gun. Meets 2002/95/EC RoHS|
|2||Switch||Two-stage switch allowing outgoing air temeprature change depending on demand|
|3||Outlet end||Outlet end, guiding hot air direction with possibility of establishment of additional accessories|
|4||Air inlet openings||Provides adequate air circulation , preventing overheating|
||Convenient handle for hanging a heat gun|
|6||Power supply cable with plug||Power supply cable 230V/50Hz|
|Supply voltage||230 V|
|Supply frequency||50 Hz|
|Nominal power (pos. 1 / pos. 2)||1000W / 1500W|
|Air temperature (pos. 1 / pos. 2)||375oC / 495oC /|
Additional accessories are included to HAG B1A+ heat gun model. These accessories are: nozzles with different cross-section and scraper handle with interchangeable tips of different shape.
* Sales only together with heat gun
Basic version HAG B1 contains: heat gun, multilanguage instruction, warranty document. In case of ordering higher model HAG B1A+ additional accessories are included.
- CE compliance
- Second electric safety class
- Ingress Protection Rating IP20 Protection class
CHAG is a multifunctional tool, which can be used as a heater, burner and soldering device. It will be provided without gas. Use a butane gas lighter refill to fill the device.
|1||Multifunctional detachable nozzle||Points towards the outlet of hot air|
|2||Exhaust vent||Provide adequate ventilation during operation|
|3||Safety lock||Safety lock switch to lock ignition button from unauthorized use|
|4||Trigger ignition button||Appropriately designed button enables quick and easy start-up device. Its design prevents from slipping a finger|
|5||Red adjustment lever
||Main ON\OFF switch|
|6||Black adjustment lever||(+) to increase temperature and gas supply and (-) to decrease temperature and gas supply|
|7||Refill butane tank||Included one does not contain butane and must be filled before the first use|
|Size (LxWxØ)||144 x 35 x 20 mm|
|Weight (w/o fuel)||57 g|
|Hours of nonstop burning||approx. 30 minutes at medium temperature|
|Operating temperature||200 - 400oC - soldering
to 450oC - heater
to 1300oC - burner
The advantage of the tool is the small size and the multifunctionality, which cover a wide range of applications.
Can be offered in an assortment box, or on a blister card. We can customize the gun with your own logo on a label.
Additionally together with assortment box we add a deflector which is dedicated to shrink the heat shrink tubing.